BROWGUARD AND VISOR SET (H85A-VCA85M)

EY/UC/V/H85A-VCA85M

Lightweight Browguard with polycarbonate visor set

Lightweight and economical browguard with wheel ratchet adjustment and adjustable headband for a precise secure fit. Visor made from 0.4″ thick poly-carbonate with aluminium edge trim which allows the visor profile to be adjusted.

PRODUCT DESCRIPTION
An extremely economical visor suitable for use with UCi browguard (H85A) and helmet visor carrier (H86). Made from 0.4″ thick polycarbonate with aluminium
edge trim which allows the visor profile to be adjusted.
AVAILABLE SIZES: ONE SIZE
( Size 8 x 15.5 x 0.04 ins
(( 200 x 393 x 1 mm ))
PACKAGING: Per Pack: 35
Per Case : 140
COLOURS AVAILABLE: Clear
NOTE: The levels of protection are based on the
LOWEST value on either the visor or carrier. These
may not be the same on both components –
check before use or contact your supplier for
more information. This product is for eye
protection against moderate impact hazards but
is NOT unbreakable.

Technical Details
Complies with the requirements of the European Standard
EN166:2001 “Personal Eye Protection”.
EN 166 3 B Suitable for continuous use (Class 1 optical)
Average energy impact (resists a 6 mm, 0.86g ball bearing
at 120 m/s) Protection against liquid splashes.
If the symbol F, B and A are not common to both visor and
frame then the lower level MUST be assigned to the complete
eye-protector.
Additional Information:
● Storage: Always store in clean, dry conditions
and contain within the poly bag/box
provided. Do not store in places subject to
direct, strong sunlight or in contact with
solvents.
● Damage: This product should be carefully
inspected before use and discarded if
damaged in anyway whatsoever.
This document and any other statement provided herein by or on behalf of UCi are given for informational purposes and do not constitute a contractual agreement nor warranty of merchantability. UCi assumes no responsibility for the suitability or adequacy of an end user’s selection of product for a specific purpose.
EN 166:2001
Ultimate Industrial Limited
Victoria House,
Colliery Road,
Wolverhampton, WV1 2RD
United Kingdom
Suitable with HP series helmets.
UPDATED: 06/2014 ISSUE NO: 2
Datasheet
Product
MEETS:
● Chemicals: Certain chemicals may have
a detrimental effect on contact with this
product. If in doubt please check with
your supplier.
● Material Declaration: No parts of the
helmet which are in contact with the
wearer are made from materials known
to cause skin irritation.
● Cleaning: Clean with warm soapy water.